OUR BLOG

 

Top DIY Tips From Your Fencing Contractor On Vinyl Fences

by | Apr 14, 2022 | Fence Services | 0 comments

Vinyl Fence Installation DIY Tips From Your Local Fencing Contractor Banner

 

Do you have your new fencing project soon? Have you heard about using vinyl fencing? Learn more about how to DIY your vinyl fence installation today with Florida’s top local fencing contractor.

What is A Vinyl Fence?

Vinyl is a type of plastic material that comes from radical ethane. From the discovery of Vinyl, other products were discovered, such as Polyvinyl Chloride (PVC), which has a wide range of uses which include wire insulations, raincoats, adhesive Vinyl, heat transfer vinyl, vinyl fences, and so on. This type of plastic, due to its low cost, flexibility, and durability, is being used in fencing, which has gained as one of the types of fencing on increasing demand for other existing fencing materials available.

What Is The Difference Between Vinyl and PVC?

These two materials are different but have been confused as the same or have been wrongly interchanged. PVC or polyvinyl chloride has so many uses, so people made their short name for PVC fencing as Vinyl. PVC is the only type of vinyl fence, so it is acceptable to use Vinyl when referring to the vinyl fencing you chose.

Why Consider Vinyl Fencing?

fencing contractor

 

 

According to local fencing contractor, here are the most common benefits of vinyl fencing, which you might be interested in before proceeding with your DIY vinyl fencing.

  • According to MSDS (Material Safety Data Sheets) information and local fencing contractor guilds, vinyl fences are not that hazardous, making them safe to use as a fencing material. In extreme cases, temperatures above 400 degrees centigrade will hasten deterioration. But this situation rarely happens in a normal environment setting.
  • The cost per square foot of fencing is at the median price compared to other types of fencing. Vinyl fences have various kinds that have a range of low cost to complex and high-end vinyl fences at high prices. It is better to discuss this concern with your local fencing contractor.
  • Vinyl fences are durable compared to chain link fence or iron wrought types that can rust and wooden fence typed that rot or are attacked by pests. With technological advancements in processing these materials, Vinyl is getting stronger and more durable compared to older vinyl versions. It is likely that it can surpass fencing performance expectations.
  • Vinyl fences are maintenance-free post-fence installation. To bring back its color and vibrant look, washing it with home cleaning products should do the trick.
  • Vinyl fences are easy to install. When the posts have been secured, the fencing contractor will have to snap the panels into shape.

 

The Vinyl Fence Types That You Can Use For Your DIY Fence Installation

It is fun to DIY your fence as it is a good experience for you and your family to set up your fence either for your lawn, part of your home, or your front yard. Sometimes it does not compare to the work of a professional vinyl fencing contractor but at least trying it yourself refers to DIY installation tips that you have acquired. According to Florida’s top fencing contractor, below are some vinyl fences to choose from for your fencing project.

  1. Split-Rail Fence: These consist of posts with two or three horizontal bars. It is used for safety purposes on pathways or spaces to prevent children or persons from falling over a hill or cliff.
  2. Privacy Fence: These are fences that block the line of sight from persons outside the property.
  3. Picket Fence: These are fences to prevent dogs and people from entering an area but do not block the view on either side of the fence. From history, these are logs that are about 4 feet in height with sharpened tops.
  4. Lattice-Top Fence: This fence consists of crossed thin vinyl strips as a trellis framed for fencing purposes.
  5. Decoratively Designed Fence: These are custom-built decorative vinyl fences framed for the purpose of your decorative fencing needs.
  6. Shadow Box Fence: It is a fence designed to give privacy but allows air to pass through the fence. It is designed for airflow purposes where the air is an important characteristic of good environmental practice.

 

File:Men painting fence green.jpg

How To Install A DIY Vinyl Fence

There are three types of DIY vinyl fences or pre-assembled vinyl fences that you can install in your home. These fences are easy to assemble as it has an instruction manual that can be followed easily. The three types that have been produced for easy installation are privacy fencing, picket fencing, and shadow box type fencing. With these three types of fencing, there are pre-assembled gates to match each type, so the fencing contractor must purchase the correct type. To enhance your skills, it is best to learn some terminology before the actual DIY initiation of the fencing project.

Terminologies

  • Main Posts – These are located on the corners of the fence and are needed on either side of the gates. These are required to be set deep on the ground for the stability of the whole fence.
  • Line posts – These are posts between the main posts used to hold and attachment points of the vinyl fence frames.
  • Rails – These are horizontal supports on the top and bottom to hold the posts. The rails are placed near the top and bottom of the pre-assembled vinyl frames.
  • Bay – This is the space between the posts. Only the rails are placed in between the posts for split-rail types, which we call the bay.
  • Gate – It is the entry and exit point on either side of the fence.

 

Steps To Easily Install Your DIY Vinyl Fence

  • Layout the outline of your fence on a graphing paper before the actual structure. An incorrect arrangement can result in problems in the precise measurements. Make further adjustments taking note of the width of the panels that may give an odd-bay size.
  • Use fencing stakes to lay out the start point from the beginning where you start your installation to the corners of the fence and to where the gates are attached.
  • Mark the fence layout and measure the corner post locations. Measure the panels and each post and bay to ensure the accuracy is met.
  • Plan the post locations and mark the post locations. Ensure that the posts and stakes are aligned by following the string line alignment to get a thorough alignment.
  • If unsure, you may try to call your local fencing contractor for advice or assistance.

 

File:Tilly Foster Farm 2004.JPG

Tips in Digging Vinyl Posts Holes

  • Dig the post holes. Dig post holes 10 inches in diameter and 6 inches deeper from the required depth for your gravel backfill before the concrete fill is poured.
  • For corner posts and gate posts, it is required to add another 6 inches in depth from the required depth and an additional 6 inches for your gravel backfill for added strength.

 

The Takeaway

Whatever the outcome of your fence project, it is a good experience, especially if it serves its purpose well. If you don’t want to test your skills, it would be best to get the services of a fencing contractor, taking a bit of cost for the installation. Some minor fencing projects, such as enclosing a small area of your backyard, would be fun.

Nevertheless, if you are new to fence installation, you might want to get the professional services of an expert fencing contractor in your area. These experts have reliable knowledge and experience in new fence installation and renovation. Most likely, they can also offer other options, including using a wood fence, chain link fences, metal fences, and more. If you wish to know more about fences, you may speak with an expert from Tampa’s best fencing contractor, Fenrails at (813) 280-0687 or email us at info@fenrails-tampa.com.

Call Now ButtonCall Now