Proper fencing can make or break your farming strategies in cultivating crops and raising livestock. It is daunting to experience not seeing your livestock where they should be when you left them the last time.

Some fencing in Tampa, FL needs improvement to ensure well-managed farming. This article teaches us the common fencing mistakes you should avoid to safeguard livestock and optimize forage production.

Fencing plays a vital role in the grazing system whether it’s conventional wood fencing or aluminum fencing. Here are the common fencing mistakes to watch out for when farming and how you can fix them.

Common Mistakes in Fencing in Tampa

#1 Not having the right size corner posts.

The strength of wood fences relies heavily on the corner posts. No matter what type of fence you choose, whether woven wire, barbed wire, high tensile electric wire, ornamental aluminum fencing, chain link fencing, vinyl fencing, or wood fencing, properly built corner posts are the top priority. Not to mention, experts found out the challenges that compromise the stability of the fences:

• Corner posts that are not undersized
• Corner posts that are not deeply anchored in the ground

To avoid this, here are the following steps to fix it:

One way to secure fencing in Tampa for farms and commercial properties is to keep the corner post in the ground by implementing a bracing system. Experts recommend establishing a floating diagonal bracing system as this is a vital factor in high-quality fences. “The angle brace is a 4-inch by 10-foot post cut a half-inch into the main corner post in a floating diagonal bracing system. On the opposite side of the corner post, you can place the other end on the ground,” Kevin Derynck, Gallagher territory manager, explained.

#2 Posts are not spaced properly.

Another mistake in fencing in Tampa, FL is also facing is the wrong spacing of posts. As said earlier, the stability of a new fence depends on the corner posts. If these posts are compromised, you can expect that your fencing is not efficient with its purpose. Respectively, it is costly if you improperly space your posts. It is an indication that you are using many posts.

To avoid this, here are the following steps to fix it:

Asking for professional help is key to knowing how much space is efficient for your chosen type of fence. Experts suggest that fencers can place posts 80-100 feet apart or 50 posts per mile for electric fences. What’s more, experts recommend implementing one post every 16.5 feet or one-rod length for barbed wire fences.

#3 The ground rod is too close to each other.

Similar to posts, ground rods should have efficient spacing too. When choosing and installing fences with a 6-joule energizer, using 18 feet of ground rods is better. In addition, a study found out that if one rod is close to the other, it compromises the effectiveness of the current of the fences. Notably, two rods close to each other are less effective than one rod.

To avoid this, here are the following steps to fix it:

Spacing is key to increasing the effectiveness of the ground rods and reducing impedance. Moreover, ground rods interact with a given volume of soil. For instance, professionals in fencing in Tampa suggested that it is best to use a galvanized rod for a ground rod.
Most livestock companies utilized an insulated galvanized lead-out wire on energizers. Using galvanized is cost-efficient relative to copper. Plus, you do not need to worry about rust and corrosion.

#4 A fencer puts a gate system that conducts current.

Another terrifying mistake in fencing in Tampa, FL has a gate system with a carrying current. Farm owners’ top priority is to secure their livestock. However, setting up a gate system with a carrying current is challenging.

To avoid this, here are the following steps to address it:

For electric system fencing in Tampa, you do not need a gate system that carries a current. Keep your fences hot by trenching both insulated hot and cold galvanized wires. If you have another purpose for having a gate system with a carrying current, it is also best to consult with a professional specializing in fencing in Tampa.

Keep in mind to place it 1- foot deep under the opening. Respectively, you can put it deeper in high-traffic areas and shallower in a less-utilized pastured environment.

#5 Building fancy fences for your farm.

One of the mistakes about fencing in Tampa, FL is choosing to build fancy fences. A good example of a fancy fence is an elk-and-moose-proof fence system. Even investing in steel posts is unnecessary to keep cattle from shorting out. At the end of the day, there are people who break it off.

To avoid this, here are the following steps to make fencing in Tampa more efficient:

You do not have to resort to any fancy fences to obtain optimized fencing mechanisms to protect your production.

Experts suggest that it is fine to settle for low-cost fences. A 2-wire range fence is considerable, wherein the top wire is at 30 inches and the second wire is at 20 inches. It is sufficient to protect your livestock and crops from elk and antelope.

For steel posts, you can replace flexible plastic or composite posts to prevent cattle from shorting out.

#6 Undersized electric fence charger (Energizer):

Using a wrong-sized energizer is another challenge when fencing in Tampa, FL. Animals will only see your fences as physical barriers, not as pain or psychological barriers, when you choose an undersized energizer.

To avoid this, here are the following steps to address it:

Jim Gerrish, an expert from American GrazingLands Services LLC, recommended that no matter how many strands of wire you choose, a joule of output per mile of fence is sufficient.

Remember to base your purchasing decision on your output joules requirement and reputable product specialist. When in doubt, do not hesitate to seek professional advice for your fencing needs.

Setting up the Right Fencing with Tampa Fence Companies

Structuring a proper fencing system will ensure an intensive grazing system and protect your livestock from wandering elsewhere. In terms of crop cultivation, right fencing prevents produce from pests and rodent infestation. Importantly, it provides a proper boundary as a legal requirement.

Now that we have enumerated the common mistakes for fencing and how to address these challenges, we hope that this will guide you in setting up your own barriers on your farm. Proper building of your fences will keep you from overspending and hassle. Another way is to seek professional help from Tampa Fence Companies and choose one that delivers excellent customer service.

When looking for a reliable provider of fencing in Tampa and a family fence company, consider acquiring top-quality fence installation and all your fencing needs from Fenrails. We cater to residential, commercial, and industrial fencing needs. Learn more about our services by calling (813) 280-0687.

Get your initial free estimates and choose from the various styles of our high-quality product be it chain-link fencing, aluminum fencing, and wood fencing. Experience our excellent customer service as the most respected fence company in Tampa, Fl.

You can also message us through email info@fenrails-tampa.com. We can’t wait to give you your free estimate and start working with you!